PTU Tut - Save the Boobies Part 2

PTU Tut - Save The Boobies Part 2
==============

♥Supplies♥

Tube
===
You'll need a close up tube for this tut.

Pink Power by Elias Chatzoudis. You can find it HERE.
This is a Pay To Use tube. You need a license to use it. Do not use this tube without a license.

Scrap Kit
======
Save the Boobies (this is part of the Save the Boobies Collab at PMTw/S) by PolkaDot Scraps by Chassity
You can find this beautiful kit @ PMTw/S HERE.

Font
===
Liana

Animation
=======
228 by Sophistocat Simone and you can find it HERE.
------------------------
♥Let's Start♥

Open a new canvas size 600x200 and 72dpi.

Open PDS_StB-paper3.jpg and copy and paste as a new layer.
Open PDS_StB-paper6.jpg and copy and past as a new layer. Change the blend mode to Soft Light.

Open the following elements and place them how I have mine. Resize if needed. See my tag for reference.

PDS_StB-scatter.png - duplicate twice and place them in a line across the banner.
PDS_StB-frame1.png
PDS_StB-heart1.png - duplicate and resize the top one so it's a bit smaller than the first one. See my tag for reference.
PDS_StB-heart2.png - Place this element between the little heart and bigger heart.
PDS_StB-feather.png
PDS_StB-birdcage.png
PDS_StB-cupcake.png
PDS_StB-wa.png
PDS_StB-ribbon2.png

Selections>Select All>Clip to Canvas. Image>Crop to Selection.

Place a nice drop shadow on each layer that compliments the tag.

Open your tube and copy and paste as a new layer and place it near the left side of your banner.

Duplicate your tube one time and move it under your PDS_StB-frame1.png layer. Resize and position so her eyes are showing in the frame.
Click inside the frame with your magic wand tool and Selections>Modify>Expand by 2. Selections>Invert.
Make your tube layer active and hit delete on your keyboard.

Now add a drop shadow to your top tube layer (not the one inside the frame, it doesn't need one).

Selections>Select All>Clip to Canvas. Image Crop to Selection.

In your Layers Palette, set your foreground to #e96aa0 and your background to white #ffffff.
Choose gradient with the following settings:

Add a new raster layer to the top and Selections>Select All. Selections>Modify>Contract by 3. Selections>Invert.
Bucket fill the selection with your gradient.
Selections>Select None.
Adjust>Add/Remove Noise>Add Noise with these settings:
Random
38
Monochrome checked

Add a new raster layer under that layer and Selections>Select All. Selections>Modify>Contract by 4. Selections>Invert.
Bucket fill with #fdd2e3.
Selections>Select None.

Add a drop shadow to the second banner frame layer.

Add your copyright and name.

If you don't want to animate, you can merge visible and save as .png or .jpg.

ANIMATING
--------------

In PSP, hide all layers except your two paper layers. Layers>Merge Visible.

Now hide the newly merged paper layer and unhide all the other layers. Layers>Merge Visible.

You should now have 2 layers in total.

Hide the top layer (the one with all the elements, tube, etc.) and Edit>Copy and Paste As New Animation in AS.
Hit Ctrl + L until you have 21 frames. Ctrl + A.

Back to PSP and unhide the top layer and hide the bottom layer. Edit>Copy and Paste As New Animation in AS.

Now, open your animation in AS and hit Ctrl + A. Then Animation>Resize Animation with the following settings:

Edit>Copy. Go back to your banner (the paper layer) and Edit>Paste>Into Selected Frame and click when you position it where you want it.

Now, go to your other banner (the elements layer) and hit the Propagate Paste button.

Hit Edit>Copy. Edit>Paste>Into Selected Frame and click when you get it perfectly centered.
Ctrl + A on your completed banner and go to Animation>Frame Properties and change it to 13.

Save as .gif.

That's it! I hope you enjoyed my tut!

PTU Tut - Save The Boobies Part 1

PTU Tut - Save The Boobies Part 1
==============

♥Supplies♥

Tube
===
You'll need a close up tube for this tut.

149-2 PinUpToons by PinupToons. You can find it HERE.
This is a Pay To Use tube. You need a license to use it. Do not use this tube without a license.

Scrap Kit
======
Save The Boobies (this kit is part of the Save the Boobies Collab at PMTw/S) by Danielle Corbitt Designs
You can find this beautiful kit @ PMTw/S HERE.

Font
===
Ribbon of Hope

Mask
===
DBV Mask 88 You can find it HERE.
------------------------
♥Let's Start♥

Open a new canvas size 600x600 (you can resize later) and 72dpi.

Open dcorbitt_savetheboobies_frame3.png and copy and paste as a new layer.

Open the following elements and place them how I have mine. Resize if needed. See my tag for reference.

dcorbitt_savetheboobies_rose.png
dcorbitt_savetheboobies_tag.png
dcorbitt_savetheboobies_bow2.png
dcorbitt_savetheboobies_flower.png-duplicate and resize the top one a little so it looks like the smaller one in my tag. They are behind the bird cage.
dcorbitt_savetheboobies_bowwithkey.png
dcorbitt_savetheboobies_bow.png
dcorbitt_savetheboobies_parasol.png
dcorbitt_savetheboobies_wordbits.png-grab your Selection tool and draw a rectangle around the "Courage" tag, Edit>Cut, Edit>Paste as New Layer.
dcorbitt_savetheboobies_birdcage.png

Place a nice drop shadow on each layer that compliments the tag.

Crop and resize as desired.
**Note: I try to resize my tag before adding the tube so it doesn't get so blurry. You can resize when you prefer.**

Open your tube and copy and paste as a new layer under your frame's shadow layer.

Click inside your frame with your magic wand tool and Selections>Modify>Expand by 2. Selections>Invert

Make your tube layer active and hit delete on your keyboard.

Now add a drop shadow to your tube.

Layers>Merge>Merge Visible

Open your mask and paper dcorbitt_savetheboobies_pp4.jpg and place it at the bottom (of course, lol).

Add your copyright and name.

Save as .png or .jpg. Whichever you prefer.

That's it! I hope you enjoyed my tut!

**Note: If your tag looks a little blurry after resizing, try going to Adjust>Sharpen>Sharpen and see if it helps. The tag I've placed at the top of this tut has been sharpened.**

CT Tags using PTU kit Fall Glory

2 Tags by CakiePotPie Designs for Redheaded Ladybug Scraps using the adorable PTU kit "Fall Glory" available @ Sweet Pinup and PinkParadoxProductions.

Green Candy Christmas CT Tag and Freebie Cluster Frame

Green Candy Christmas is Queenie's first PTU kit and it's so cute! 

I've made a tag and a cluster frame using it! 

You can purchase her kit HERE and view her store HERE.

You can grab my cluster frame on my blog HERE.

PTU Tut - Attitude

PTU Tut - Attitude
==============

♥Supplies♥

Tube
===
You'll need a full or at least one with 2/3 of a body tube for this tut.

Olga by Elias Chatzoudis. You can find it HERE.
This is a Pay To Use tube. You need a license to use it. Do not use this tube without a license.

Scrap Kit
======
Attitude II by Pimp'd Designz
You can find this beautiful kit @ PMTw/S HERE.

Font
===
Styleboy ITC
------------------------
♥Let's Start♥

Open a new canvas size 800x800 (you can resize later) and 72dpi.

Open pd-frame-03.png and copy and paste as a new layer.
Rotate it to the right so the slim side is on the right side.

Open the following elements and place them how I have mine. Resize if needed. See my tag for reference.

pd-wa-01.png
pd-stars-05.png
pd-flower-01.png-at the bottom of the cluster
pd-stars-03.png
pd-flower-01.png- at the top of the cluster
pd-notebook.png
pd-flower-03.png- right on top of the notebook
pd-kiss-01.png
pd-skull-heart.png
pd-string-01.png
pd-flower-02.png
pd-flower-03.png- right on top (the one with my copyright info on it)

Place a nice drop shadow on each layer that compliments the tag.

Crop and resize as desired.
**Note: I try to resize my tag before adding the tube so it doesn't get so blurry. You can resize when you prefer.**

Open your tube and copy and paste as a new layer above your frame but under pd-wa-01.png layer.

Using your magic wand, click inside your frame, Selections>Modify>Expand by 2 and Selections>Invert.

Select your top tube layer and use your eraser tool to erase the bottom half of your tube that's out of the frame.
Repeat with your bottom tube layer.

Now add a drop shadow to your tube.

Open paper pd-pp-12.png and copy and paste as a new layer under your bottom tube layer.

Grab your magic wand again, click inside the frame and Selections>Modify>Expand by 2 and Selections>Invert.

Make your paper layer active and hit delete on your keyboard.
Selections>Select All>Clip to Canvas. Image>Crop to Selection.

Now open pd-print-01.png and copy and paste as a new layer above your paper layer but below your bottom tube layer.
Change the blend mode to Screen.

Layers>Merge>Merge Visible

Add your copyright and name.

Save as .png or .jpg. Whichever you prefer.

That's it! I hope you enjoyed my tut!

PTU Tut - Arachnid

PTU Tut - Arachnid
==============

♥Supplies♥

Tube
===
You'll need a full body tube for this tut.

Xenia by Zlata_M. You can find it HERE.
This is a Pay To Use tube. You need a license to use it. Do not use this tube without a license.

Scrap Kit
======
Arachnid by Designs by Sarah
You can find this beautiful kit @ PMTw/S HERE.

Font
===
Spinklescolors

Mask
===
DBV Mask 72 You can find it HERE.

My Supplies
=========
You will need my texture and you can download it HERE.
------------------------
♥Let's Start♥

Open a new canvas size 800x800 (you can resize later) and 72dpi.

Open sb_pmt_arachnid_frame 3.png and copy and paste as a new layer.
Slightly rotate it to the right.

Open the following elements and place them how I have mine. Resize if needed. See my tag for reference.

sb_pmt_arachnid_string 1.png
sb_pmt_arachnid_bow 2.png
sb_pmt_arachnid_shoe 1.png - Duplicate it, Image> Mirror and cross it on top of the other shoe. See my tag for reference.
sb_pmt_arachnid_ribbon 4.png - Rotate to the left and place where I have mine.
sb_pmt_arachnid_string 3.png
sb_pmt_arachnid_flower 3.png
sb_pmt_arachnid_flower 1.png
sb_pmt_arachnid_cupcake.png
sb_pmt_arachnid_tag.png
sb_pmt_arachnid_flower 2.png
sb_pmt_arachnid_spider 4.png

Place a nice drop shadow on each layer that compliments the tag.

Crop and resize as desired.
**Note: I try to resize my tag before adding the tube so it doesn't get so blurry. You can resize when you prefer.**

Open your tube and copy and paste as a new layer above your frame but under sb_pmt_arachnid_ribbon 4.png layer.

Now add a drop shadow to your tube.

Duplicate your tube and move it under your frame (and frame's shadow) layer. Then duplicate that tube layer 3 times.

Place them strategically inside the frame. Notice I have two facing one way and two facing another and they fill in the inside of the frame.

Merge your 4 tube layers. Grab your magic wand and click inside your frame. Selections> Modify> Expand by 2. Selections> Invert.
Go to your 4 tubes layer and hit delete on your keyboard.

Duplicate your 4 tubes layer. Adjust> Blur> Gaussian Blur @ 5.00. Go to Adjust> Add/Remove Noise> Add Noise and use the following settings:

Random
56
Monochrome checked

Now change the blend mode to Darken.

Now grab the texture (provided in my supplies) and copy and paste as a new layer. Rotate it slightly to the right (line it up with your frame).
Use your magic wand again to click inside your frame. Selections> Modify> Expand by 2. Selections> Invert and hit delete on your keyboard.

Change the blend mode on the texture layer to Screen

Layers>Merge>Merge Visible

Open your mask and paper sb_pmt_arachnid_pp4.jpg and place it at the bottom (of course, lol).

Add your copyright and name.

Save as .png or .jpg. Whichever you prefer.

That's it! I hope you enjoyed my tut!

PTU Tut - City Bling

PTU Tut - City Bling
==============

♥Supplies♥

Tube
===
You'll need a tube with a full body for this tut.

Tasha by Alex Prihodko. This is an Exclusive tube. You can find it HERE.
This is a Pay To Use tube. You need a license to use it. Do not use this tube without a license.

Scrap Kit
======
City Bling by Inzpired Creationz
You can find this beautiful kit @ PMTw/S HERE

Font
===
Satisfaction

Mask
===
Masks0126-SophisticatSimone by Sophistocat Simone and you can find it HERE.

Plugins
=====
Alien Skin Xenofex 2 - Constellation
OPTIONAL - Alien Skin Eye Candy 4000 - Glass

------------------------
♥Let's Start♥

Open a new canvas size 800x800 (you can resize later) and 72dpi.

Open Frame 3.png and copy and paste as a new layer.

Open the following elements and place them how I have mine. Resize if needed. See my tag for reference.

Bow 1.png
Lolli 3.png
Makeup 6.png- Image> Mirror
Cupcake 3.png
Makeup 2.png
Nailpolish 3.png
Ribbon 1.png
Purse 3.png
VIP Pass.png
Wordart.png
Lipstick 3.png
Lips 2.png
Tiara.png- Rotate slightly to the left.

Place a nice drop shadow on each layer that compliments the tag. I used these settings for each layer:
Offset V: 4
Offset H: -3
Opacity: 45
Blur: 10
Color: Black

Crop and resize to suit your needs.

Open your tube and copy and paste as a new layer. Duplicate, move one layer under the frame and one layer just above your Bow 1.png layer.
Use your magic wand tool to click inside the frame, Selections> Modify> Expand by 2, Selections> Invert.
Use your eraser tool to erase the parts of the tube (both layers) that are sticking out of the bottom of the frame.

Add a nice drop shadow to your top tube layer. No need to shadow the bottom layer.

Now duplicate your top tube layer again and resize it so her face fits nicely inside the VIP Pass.png element's frame.
Select your VIP Pass.png layer and click inside the little frame. Selections> Modify> Expand by 2. Selections> Invert.
Make your tiny tube layer active and hit delete on your keyboard.

Layers> Merge> Merge Visible

Add a new raster layer and add your mask with paper 15.jpg.

Layers> Merge> Merge Visible

Add your copyright and name.

After you add your name, convert to raster and Selections> Select All. Selections> Float. Selections> Defloat. Selections> Modify> Expand by 2
Add a new raster layer under your name layer and fill with color of choice. Selections> Select None or Ctrl + D.





Go to Effects> Plugins> Alien Skin Xenofex 2> Constellation and use the following settings:

OPTIONAL --I also added Alien Skin Eye Candy 4000 Glass to the main name layer with the following settings:

Save as .png or .jpg. Whichever you prefer.

That's it! I hope you enjoyed my tut!


ANIMATING
===========
Here's an animated version too! Before you add Constellation, duplicate your name outline layer twice hit the random button in your plugin for each layer.
Then just go into AS, hide the two top name outline layers and Edit> Copy Merged, then paste as new animation in AS. Hide that layer in your PSP Layers Palette, and unhide the middle outline layer and then
Edit> Copy Merged and Paste After Current Frame in AS and then repeat for the last layer. That's it! :)